Our Team

At Adventure Church we strive for excellence in everything that we do. Our production team is no exception to that! Our team is full of extremely gifted and skilled individuals and we could not do church without each and everyone of you.

I realize that as our church and our teams continue to grow so does our training and understanding of how we create excellence and consistency across everything that we do.

Our Values

WE GET TO DO THIS!

We get to be a part of something larger than ourselves. We get to lead people into life change. We get to serve God with our gifts and be a resource to the local church.

WE MAKE IT TOGETHER!

We are in this to win this and will only make it together. It takes us all. We show up for each other. We give to our team. We are at our best when our uniqueness connects. We celebrate our victories and learn from the rest.

Production on/off Procedures

All computer passwords are AC2013ac

Audio Start-Up
  • Turn On FOH rack located under the desktop in the center. Power switch is on the top right.
  • Turn on DBX DriveRack AMP in the back room.
  • Turn on 2 power switches behind the stage door in the back room. This is power for lights and the projector.
  • Turn on 1 power switch on stage left. This is power for speakers.
  • Turn on the confidence monitor. Use “Hisense” remote. Remote is in the remote caddy on the sound booth wall. Select HDMI 2.
  • Turn on Broadcast Computer in the back room enter password
  • Turn on Secondary monitor
  • Open Master Broadcast folder and Click on the record looking icon called master broadcast.
  • Once opened click on a channel and hit Command A to select all channels then click on any one of the little red Rs on the bottom of the channels
  • Then click on a single channel again to deselect all
  • Turn on Monitor on top of rack
  • Lobby elements
    • Turn on the two speakers in the lobby using the white ZAP remote control. Remote is in the remote caddy on the sound booth wall.
      • Press the top two left buttons. Blue light will turn for each speaker.
    • Turn on the monitor in the lobby. Remote is in the remote caddy on the sound booth wall. Press power button (not TV button).
Video Start-Up
  • Turn on cameras.
    • Center Right Camera –  – BlackMagic Studio.
      • Turn on BlackMagic Camera. Power button is front right. Hold down until on.
      • Turn on the ARCII controller. Power button is top right. Hold down until on.
    • Center Left Camera – BlackMagic Studio.
      • Turn on BlackMagic Camera. Power button is front right. Hold down until on.
    • Left to FOH Camera – BlackMagic mini camera.
      • Turn on the BlackMagic mini camera. Power button is on the right side of the camera. 5th button down from top.
      • Turn on the external display. Power button is the blank circle button on the right side.
    • Turn On the Vizeo TV and Second Monitor 
    • Turn on Ipad and open Arc app. Tap Connect and then Remote to control Rhino arc moving head
ProPresenter7 Start-Up
  • Turn On Computer (Power button is Back Left bottom)
  • Open up ProPresenter7
  • Open Sunday Service Flow Playlist on top right window
Lighting Start-Up
  • Movers on Floor – Push in and twist blue power cables to turn on
  • Turn on haze machine (power switch is located on the top left of unit)
  • Twist the Co2 tank valve to open
  • Turn on Both Lighting Monitors
  • Open up Vista 3 and select ‘21 show
  • Click on busk to open all windows
  • The control panel with sliders are your main scene presets. (First – Preservice, Second – Song 1,, Third – Song 2, Fourth – Song 3, Fith – Message)
  • In the playback window to the right of the Pannel with faders Select video Playlist (this gives you the video preset to darken the room)
SHUTDOWN Procedure

Team Effort

  • Turn on auditorium lights – switch on back wall
  • Lights MacMini – Click the red circle with a line on it beside live on the far left screen in the bottom left hand portion of the screen then click  ‘Release’ at the top  to reset lights
  • Floor Lights – twist blue power cords slightly pulling them out to discontent power
  • Hazer – Twist Co2 tank valve to close. Power unit off using power switch on the top left side of the unit

 

  • Lobby elements
    • Turn off the two speakers in the lobby using the white ZAP remote control. Remote is in the remote caddy on the sound booth wall.
      • Press the right buttons. Blue light will turn off for each speaker.
    • Turn off the monitor in the lobby. Remote is in the remote caddy on the sound booth wall. Press power button (not TV button).
  • Turn off cameras.
    • Right Center Camera –  – BlackMagic Studio. 
      • Turn off BlackMagic Camera. Power button is front right. Hold down until off.
      • Turn off the ARCII controller. Power button is top right. Hold down until off.
    • Left Center Camera – BlackMagic Studio. 
      • Turn off BlackMagic Camera. Power button is front right. Hold down until off.
    • Left FOH Camera – BlackMagic mini camera.
      • Turn off the BlackMagic mini camera. Power button is on the right side of the camera. 5th button down from top.
      • Turn off the external display. Power button is the blank circle button on the right side.

 

  • Turn off stage elements
  • Turn off 3 subwoofers (left, Right center, and right most). On/off switch is at rear of subwoofers.
  • Turn off the projector with White Sony Remote remote. You must be aimed at the projector. Push power button once. Remote is in the remote caddy on the sound booth wall.
  • Turn off the confidence monitor. Use “Hisense” remote. Remote is in the remote caddy on the sound booth wall. Select HDMI 2.
  • Turn off 1 power switch by door. This is power for speakers.
  • Turn off 2 power switches behind the stage door in the back room. This is power for lights and the projector..
  • Shute Down Logic on Broadcast Computer
  • Shute Down broadcast  computer and turn off monitors
  • Quit Propresenter7 and Shut down computer
  • Shut off the FOH Rack located under the desk in the center (Powere button on top right of rack)
  • Shute off Video Monitors
  • Shut off Lighting Monitors
  • Charge mice and keyboards

Transitioning Between Camera Angles

We use cuts for all transitions. There should never be a time where a crossfade is used to switch angles.

Camera Angles

Tight Follow Shot
Tight Follow Shot

This should be the main Shot. This is slightly above waist and up. There should not be more than 4-6 inches of headroom.

Medium Wide Static Shot
Medium Wide Static Shot

This shot is either ankle up or slightly below the knee up with 4-6 inches of headroom. It’s important to go to this shot when we have Lower Thirds on the screen. That way the lower third is not covering the majority of the speakers body

Wide Shot
Wide Shot

This shot should have an even amount of space on top and bottom and is a wide shot of the room typically covering side-side of the stage. This shot should mainly be used during transitions on stage or when a speaker is about to go outside the medium wide shot.